<legend id="4h9on"></legend>

<th id="4h9on"><pre id="4h9on"></pre></th>

    <em id="4h9on"></em>

  1. <dd id="4h9on"></dd>

    <form id="4h9on"><strike id="4h9on"></strike></form>

    <button id="4h9on"><acronym id="4h9on"></acronym></button>

  2. 您好!宜興市雙龍陶瓷有限公司專業生產:陶瓷填料,絕緣陶瓷,拉西環,電器陶瓷,波紋填料!
    全國銷售服務咨詢熱線:13771308135公司首頁|收藏本站|設為首頁

    矩鞍環003


    1.jpg

    陶瓷矩鞍環屬于陶瓷填料一種型號,陶瓷矩鞍環采用連續擠出的工藝進行加工,與同種材質的拉西環填料相比,陶瓷矩鞍環具有通量大、壓降低、效率高等優點。矩鞍環填料床層具有較大的空隙率,床層內多為圓弧形液體通道,減少了氣體通過床層的阻力,也使液體向下流動時的徑向擴散系數減小。陶瓷矩鞍環的形狀介于環形與鞍形之間,因而兼有兩者之優點,這種結構有利于液體分布和增加氣體通道。陶瓷矩鞍環 由于其具有高的密度和優異的耐酸耐熱性能,并且能耐除氫氟酸以外的各種無機酸、有機酸及有機溶劑腐蝕。陶瓷矩鞍環可用于化工、冶金、煤氣、環保等行業的干燥塔、吸收塔、冷卻塔、洗滌塔、再生塔等。

    ceramic rasching ring is the earliest developed random packing, named after the German chemist Friedrich Raschig. It's small tube cutting, which outside diameter is equal to its height, providing a surface for (re)evaporation of the most volatile part in the refluxing distillate, typically 10 mm in diameter and 12 mm long. 

    It's used in commercial fractional distillation towers to reduce pressure loss (versus using trays), while maintaining good efficiency and economy. Typically the change in pressure (also called "delta p") is lower than in the case of trays but slightly higher than for structured packing. 

    With the characters of high mechanical strength, high chemical stability, and excellent heat endurance, Ceramic Raschig Ring can resist high temperature, acid (except HF), alkali, salt and various organic solvents. It's widely applied in various packing towers of desiccation, absorption, cooling, washing, and regeneration in industries of petrochemical, chemical, metallurgy, gas and oxygen generation. 

    For raschig ring with big size over 100mm, it's usually filled in the column orderly. If its size is less than 100mm, raschig ring is stacked in the column randomly.

    Ceramic Random Packings

    Ceramic random packings include Rasching ring, Cross partition ring, Pall ring , Intalox saddles, Super Intalox, Cascade ring and Conjugate ring.

    Main specification:

    Name Type Diameter×Height×Thickness Surface Area Void Fraction Bulk Density No.,bulk Dry Packing Factor
    mm m2/m3 % Kg/m3 n/m3 m-1
    Rasching ring Φ25 25×25×2.5 190 78 510 49100 400
    Φ38 38×38×4 126 75 580 12700 305
    Φ50 50×50×5 93 81 465 6400 177
    Φ80 80×80×8 90 68 640 1910 234
    Φ100 100×100×10 70 70 655 1000 172
    Φ150 150×150×15 50 68 655 292 142
    Name Type Diameter×Height×Thickness Surface Area Void Space Bulk Density No.elements Packing Factor
    mm m2/m3 % Kg/m3 n/m3 m-1
    Cross-partition ring Φ50 50×50×5 135 50 520 5600 1080
    Φ80 80×80×8 120 53 780 2100-2500 806
    Φ100 100×100×10 110 56 750 900-1000 626
    Φ150 150×150×15 60 58 680 270-300 308
    Name Type Diameter×Height×Thickness Surface Area Void Space Bulk Density No.elements Packing Factor
    mm m2/m3 % Kg/m3 n/m3 m-1
    Pall ring Φ25 25×25×3 210 73 630 36000 540
    Φ38 38×38×4 140 75 590 12000 332
    Φ50 50×50×5 100 78 520 4900 210
    Φ80 80×80×8 90 72 640 1910 131
    Name Type Diameter×Height×Thickness Surface Area Void Space Bulk Density No.elements Packing Factor
    mm m2/m3 % Kg/m3 n/m3 m-1
    Intalox saddles Φ16 16×2×2 450 70 710 382000 1311
    Φ25 25×19×3 250 74 610 84000 617
    Φ38 38×30×4 164 75 590 19680 389
    Φ50 50×40×5 142 76 560 8100 323
    Φ76 76×57×9 92 78 520 1800 194
    Name Type Diameter×Height×Thickness Surface Area Void Space Bulk Density No.elements Packing Factor
    mm m2/m3 % Kg/m3 n/m3 m-1
    Supper Intalox Φ25 25×19×3 160 78 530 52000 337
    Φ38 38×30×4 102 80 480 16000 199
    Φ50 50×40×5 88 81 450 7300 166
    Φ76 76×57×9 58 82 430 1600 105
    Name Type Diameter×Height×Thickness Surface Area Void Space Bulk Density No.elements Packing Factor
    mm m2/m3 % Kg/m3 n/m3 m-1
    Cascade ring Φ25 25×15×3 210 73 650 72000 540
    Φ38 38×23×4 153 74 630 21600 378
    Φ50 50×30×5 102 76 580 9100 232
    Φ76 76×46×9 75 78 530 2500 158
    Name Type Diameter×Height×Thickness Surface Area Void Space Bulk Density No.elements Packing Factor
    mm m2/m3 % Kg/m3 n/m3 m-1
    Conjugate ring Φ25 25×25×3 175 78 520 64000 369
    Φ38 38×38×4 118 80 470 14000 230
    Φ50 50×50×5 72 81 450 6300 135

    Detailed Product Description

    Ceramic saddles, ceramic saddle ring, ceramic saddle tower packing, ceramic tower packing, ceramic random packing

    Size & Specification:

    Product Name Size Diameter*Height*Thickness Surface Area Void Bulk Number/ m3 Packing factor
    mm mm m2/m3 Space Density m-1
    % kg/m3
    Intalox saddle Φ16 16×12×2 450 70 710 382000 1311
    ring Φ25 25×19×3 250 74 610 84000 617
    Φ38 38×30×4 164 75 590 25000 389
    Φ50 50×40×5 142 76 560 9300 323
    Φ76 76×57×9 92 78 520 1800 194

    Ceramic Saddles are divided into two different types of products according to their properties, KPK-CIS-A is often used in the field of Chemical and Petrochemical industries, and KPK-CIS-B is mainly used in environmental areas such as RTO(Regenerative Thermal Oxidizers) equipment. But both of them are the most frequently used high-performance packing and exhibit advantages for most applications in comparison with other shapes.  Their smooth surface imparts a high chemical resistance and provides Ceramic Intalox saddle rings (Ceramic Saddles) with a high level of stability.  Due to their simple form, ceramic saddles can be produced at a relatively low cost.

    Chemical composition:

    SiO2 Al2O3 Fe2O3 CaO MgO K2O+Na2O Other
    >73% 17-23% <1.0% <0.5% <0.5% 2-4% <0.1%

    Physical properties:

    Index Value
    Specific gravity(g/cm3) 2.3
    Water absorption (%) <0.3
    Acid resistance (%) >99.6
    Max operating temp.() 1100
    Porosity (%) <1
    Mohs hardness(scale) >6.5
    Thermal conductivity(w/m.k) 0.9-1.0
    Specific heat(j/kg) 850-900

    Pall Ringdetail

    Ceramic pall ring is a kind of random packing further developed based on Rischig Ring, with two layers of windows opened along its tube wall. The outside diameter is equal to its height. For each layer, there are 3 ligules bending inward the axes of the ring. The open position for windows between the two layers is staggered oppositely.

    Generally, the area for open windows occupies 30% of the total area of the tube wall. It helps vapor and liquid flow freely through these windows, making full use of the rings inner surface to improve distribution of vapor-liquid.

    With the characters of high mechanical strength, high chemical stability, and excellent heat endurance.

    Ceramic Pall Ring can resist high temperature, acid ( except HF ), alkali, salt and various organic solvents. It is widely applied in various packing towers of desiccation, absorption, cooling, washing and regeneration in industries of petrochemical, chemical, metallurgy, gas and oxygen generation.

    If ring's size is over 100mm, it is usually filled in column orderly. If its size is less than 90mm, pall ring is stacked in the column randomly.

    Technical Date:

    Name Normal Diameter*Height* No.elements
    mm Thickness mm Surface area Void space Bulk density per/m3 Packing factor
    m2/m3 % kg/m3 m-1
    Pall ring ?25 25*25*3 210 73 630 36000 540
    ?38 38*38*4 140 75 590 12000 332
    ?50 50*50*5 100 78 520 4900 210
    ?76 76*76*9 70 80 470 1500 137
    名稱 規格 尺寸
           D×H×T
    比表面積
           Surface Area
    空隙率
           Void Space
    堆積比量
           Bulk Density
    個數
           No.elements
    填料因子
           Packing Factor
    Name Type mm m2/m3 % Kg/m3 n/m3 m-1
    鮑爾環Pall ring Φ25 25×25×3 210 73 630 36000 540
    Φ38 38×38×4 140 75 590 12000 332
    Φ50 50×50×5 100 78 520 4900 210
    Φ80 80×80×8 90 72 640 1910 131
    名稱 規格 尺寸
           D×H×T
    比表面積
           Surface Area
    空隙率
           Void Space
    堆積比量
           Bulk Density
    個數
           No.elements
    填料因子
           Packing Factor
    Name Type mm m2/m3 % Kg/m3 n/m3 m-1
    矩鞍環Intalox saddles Φ16 16×2×2 450 70 710 382000 1311
    Φ25 25×19×3 250 74 610 84000 617
    Φ38 38×30×4 164 75 590 19680 389
    Φ50 50×40×5 142 76 560 8100 323
    Φ76 76×57×9 92 78 520 1800 194
    名稱 規格 尺寸
           D×H×T
    比表面積
           Surface Area
    空隙率
           Void Space
    堆積比量
           Bulk Density
    個數
           No.elements
    填料因子
           Packing Factor
    Name Type mm m2/m3 % Kg/m3 n/m3 m-1
    拉西環Rasching ring Φ25 25×25×2.5 190 78 510 49100 400
    Φ38 38×38×4 126 75 580 12700 305
    Φ50 50×50×5 93 81 465 6400 177
    Φ80 80×80×8 90 68 640 1910 234
    Φ100 100×100×10 70 70 655 1000 172
    Φ150 150×150×15 50 68 655 292 142
    宜興市雙龍陶瓷有限公司logo
    宜興市雙龍陶瓷有限公司
    地 址:中國 江蘇 宜興市 宜興市陶都工業園川埠路
    聯系人:邵小漪 女士 (業務部 業務經理)
    電話:86 0510 87490186 / 傳真:86 0510 87491100
    網址:www.grahajodoh.com
    E-mail:yx_sltc@163.com / aceshao@yxsltc.com / postmaster@yxsltc.com
    本站關鍵詞:陶瓷填料,絕緣陶瓷,拉西環,電器陶瓷,波紋填料,陶瓷鮑爾環,矩鞍環,耐磨陶瓷,高溫陶瓷,高壓陶瓷,廣東,鹽城,上海,蘇州,浙江,寧波,深圳,北京,生產廠家,價格,多少錢,規格,廠,哪家好,批發,作用
    97超碰人人做人人爱欧美_人妻少妇绿帽沉沦_2019香蕉在线观看直播视频_老头猛挺进她的体内